The Peg-Y Alu Tent Stakes are a set of 10 Y-shaped duralumin pegs, each 175 mm long and weighing just 10 g, designed for backpackers and expedition campers who need maximum holding power at minimum weight. The tri-point Y-profile packs far more surface area against the soil than a round pin, so each stake bites hard and resists the twisting and pull-out that loosens ordinary pegs under a taut guy line. The whole set weighs only 100 g (3.5 oz), making it one of the lightest full anchoring kits you can carry.
These tent accessories come from Terra Incognita, a European brand with over 18 years of expedition heritage and in-house gear production. The high-grade duralumin alloy keeps the pegs rigid enough to drive into firm ground yet light enough that a full set of ten barely registers in your pack.
Who are the Peg-Y Alu stakes designed for?
These stakes are built for backpackers, ultralight hikers, and expedition campers counting every gram but still demanding a shelter that stays pitched. The Y-profile shines in grass, soil, and firm dirt where holding power matters, and the 175 mm length reaches deep enough to keep tension on a taut fly through a windy night. They also make a smart upgrade from the flimsy pins that ship with most stock tents.
Why do the Peg-Y Alu stakes resist pulling loose?
Because each stake presents three gripping faces, it resists rotating out of the ground when a guy line tugs at it from an angle. That means fewer midnight re-stakings and a fly that stays drum-tight. At 10 g apiece the pegs feel almost weightless, yet the duralumin alloy is stiff enough to drive without bending in compact soil.
How do Peg-Y Alu stakes compare to round aluminum pegs?
Round aluminum pins are cheap but they spin loose and pull out easily under load. Heavier steel stakes hold well but punish your pack weight. The Peg-Y Alu set sits in the sweet spot: Y-profile holding power close to a stake twice its weight, with a per-stake mass of just 10 g. For a full ten-piece kit at 100 g, that is a rare balance.
Specifications
| Characteristic | Peg-Y Alu |
|---|---|
| Set Weight (EU) | 100 g |
| Set Weight (US) | 3.5 oz |
| Single Stake Weight (EU) | 10 g |
| Single Stake Weight (US) | 0.35 oz |
| Length (EU) | 175 mm |
| Length (US) | 6.9 in |
| Diameter (EU) | 12 mm |
| Diameter (US) | 0.47 in |
| Quantity per Set | 10 stakes |
| Material | High-Grade Duralumin |
| Shape | Tri-Point Y-Profile |
| Best Use | Camping, Travel, Tourism, Emergency Situations |
| Product Type | Ultralight Y-Shaped Tent Stakes |
Key features
- Tri-point Y-profile - three faces grip far more soil than a round pin for maximum stability
- Ultralight duralumin - a high-grade alloy that holds firm at just 10 g per stake
- High rotation resistance - the Y-shape stops the peg spinning or backing out under tension
- Expedition-tuned 175 mm length - deep enough to hold, short enough to pack easily
- Complete 10-piece set - covers standard tent corners and guy-out points in one kit
- Feather-light total weight - the full set adds only 100 g (3.5 oz) to your load
Who makes it
Terra Incognita has spent more than 18 years running trips and expeditions and manufacturing its own outdoor gear, so this model comes off the brand's own production line rather than a rebadged catalog. Every item carries a 12-month manufacturer warranty, and the design is tested in the field by the people who guide the trips.
Peg-Y Alu stakes FAQ
How much does the stake set weigh?
The full 10-piece set weighs 100 g (3.5 oz), and each individual stake weighs just 10 g (0.35 oz). That makes it one of the lightest complete anchoring kits available, ideal for ultralight and backpacking setups.
How many stakes are in the set?
The set includes 10 stakes. That is enough to anchor the corners and main guy-out points of a standard tent, giving you a complete staking solution out of the box.
Do Y-shaped stakes hold better than round pegs?
Yes, the Y-profile holds significantly better. Its three gripping faces contact more soil and resist the rotation and pull-out that loosen round pins, keeping your tent taut and secure even under strong guy-line tension.
What are the stakes made of?
They are made of high-grade duralumin, a lightweight aluminum alloy. Duralumin keeps each stake at only 10 g while staying rigid enough to drive into firm ground without bending.
How long is each stake?
Each stake is 175 mm (6.9 in) long. This length is tuned for expeditions: deep enough for a solid hold in most soils, yet short enough to pack down compactly.
Related gear
The Peg-Y Alu Tent Stakes are a set of 10 Y-shaped duralumin pegs, each 175 mm long and weighing just 10 g, designed for backpackers and expedition campers who need maximum holding power at minimum weight. The tri-point Y-profile packs far more surface area against the soil than a round pin, so each stake bites hard and resists the twisting and pull-out that loosens ordinary pegs under a taut guy line. The whole set weighs only 100 g (3.5 oz), making it one of the lightest full anchoring kits you can carry.
These tent accessories come from Terra Incognita, a European brand with over 18 years of expedition heritage and in-house gear production. The high-grade duralumin alloy keeps the pegs rigid enough to drive into firm ground yet light enough that a full set of ten barely registers in your pack.
Who are the Peg-Y Alu stakes designed for?
These stakes are built for backpackers, ultralight hikers, and expedition campers counting every gram but still demanding a shelter that stays pitched. The Y-profile shines in grass, soil, and firm dirt where holding power matters, and the 175 mm length reaches deep enough to keep tension on a taut fly through a windy night. They also make a smart upgrade from the flimsy pins that ship with most stock tents.
Why do the Peg-Y Alu stakes resist pulling loose?
Because each stake presents three gripping faces, it resists rotating out of the ground when a guy line tugs at it from an angle. That means fewer midnight re-stakings and a fly that stays drum-tight. At 10 g apiece the pegs feel almost weightless, yet the duralumin alloy is stiff enough to drive without bending in compact soil.
How do Peg-Y Alu stakes compare to round aluminum pegs?
Round aluminum pins are cheap but they spin loose and pull out easily under load. Heavier steel stakes hold well but punish your pack weight. The Peg-Y Alu set sits in the sweet spot: Y-profile holding power close to a stake twice its weight, with a per-stake mass of just 10 g. For a full ten-piece kit at 100 g, that is a rare balance.
Specifications
| Characteristic | Peg-Y Alu |
|---|---|
| Set Weight (EU) | 100 g |
| Set Weight (US) | 3.5 oz |
| Single Stake Weight (EU) | 10 g |
| Single Stake Weight (US) | 0.35 oz |
| Length (EU) | 175 mm |
| Length (US) | 6.9 in |
| Diameter (EU) | 12 mm |
| Diameter (US) | 0.47 in |
| Quantity per Set | 10 stakes |
| Material | High-Grade Duralumin |
| Shape | Tri-Point Y-Profile |
| Best Use | Camping, Travel, Tourism, Emergency Situations |
| Product Type | Ultralight Y-Shaped Tent Stakes |
Key features
- Tri-point Y-profile - three faces grip far more soil than a round pin for maximum stability
- Ultralight duralumin - a high-grade alloy that holds firm at just 10 g per stake
- High rotation resistance - the Y-shape stops the peg spinning or backing out under tension
- Expedition-tuned 175 mm length - deep enough to hold, short enough to pack easily
- Complete 10-piece set - covers standard tent corners and guy-out points in one kit
- Feather-light total weight - the full set adds only 100 g (3.5 oz) to your load
Who makes it
Terra Incognita has spent more than 18 years running trips and expeditions and manufacturing its own outdoor gear, so this model comes off the brand's own production line rather than a rebadged catalog. Every item carries a 12-month manufacturer warranty, and the design is tested in the field by the people who guide the trips.
Peg-Y Alu stakes FAQ
How much does the stake set weigh?
The full 10-piece set weighs 100 g (3.5 oz), and each individual stake weighs just 10 g (0.35 oz). That makes it one of the lightest complete anchoring kits available, ideal for ultralight and backpacking setups.
How many stakes are in the set?
The set includes 10 stakes. That is enough to anchor the corners and main guy-out points of a standard tent, giving you a complete staking solution out of the box.
Do Y-shaped stakes hold better than round pegs?
Yes, the Y-profile holds significantly better. Its three gripping faces contact more soil and resist the rotation and pull-out that loosen round pins, keeping your tent taut and secure even under strong guy-line tension.
What are the stakes made of?
They are made of high-grade duralumin, a lightweight aluminum alloy. Duralumin keeps each stake at only 10 g while staying rigid enough to drive into firm ground without bending.
How long is each stake?
Each stake is 175 mm (6.9 in) long. This length is tuned for expeditions: deep enough for a solid hold in most soils, yet short enough to pack down compactly.
Related gear
You may also like
