The Terra Incognita Wave is an inflatable sleeping mat with a 3D air-chamber construction and an integrated pillow, built for campers who want a plush, insulated sleep surface that still packs down to the size of a water bottle. At 3.5 inches (9 cm) thick and 660-680 grams, it strikes the balance between backcountry portability and near-mattress comfort, and it comes in two size options so taller and shorter sleepers alike can find a proper fit.
Who is the Wave sleeping pad best suited for?
The Wave suits car campers, festival-goers, and backpackers who refuse to trade a good night of sleep for a lighter pack. Side sleepers benefit most from the 3.5-inch loft, which keeps hips and shoulders off the ground where a thinner foam pad would bottom out. The two size options make it a sensible pick for households sharing gear, since a taller and a shorter camper can each carry the length that fits them.
What materials make up the Wave pad?
Both the top and bottom faces use 20D nylon ripstop bonded with a TPU laminate. The ripstop weave stops small nicks from spreading into long tears, while the TPU layer holds air pressure and adds a measure of grip against a tent floor. The 3D chamber layout distributes your weight across independent baffles rather than one open bladder, which is what gives the pad its stable, supportive feel.
How do you set up and pack away the Wave?
Open the flat valve and inflate with a few steady breaths, topping off to your preferred firmness once you are lying on it. To pack down, open the valve fully, fold from the pillow end to push out the air, then roll tightly and store in the included sack. Keep the pad away from campfire sparks and sharp objects, wipe it clean with mild soap and water, and always store it loosely inflated at home to protect the laminate.
Specifications
| Characteristic | Size M | Size L |
|---|---|---|
| Dimensions (EU) | 176×54×9 cm | 188×67×9 cm |
| Dimensions (US) | 69×21×3.5 in | 74×26×3.5 in |
| Packed Size (EU) | ∅11×28 cm | ∅13×28 cm |
| Packed Size (US) | ∅4.3×11 in | ∅5.1×11 in |
| Weight Range (EU) | 660-680 g | 880-900 g |
| Weight Range (US) | 23.3-24.0 oz | 31.0-31.7 oz |
| Upper Material | 20D Nylon Ripstop with TPU laminate | |
| Bottom Material | 20D Nylon Ripstop with TPU laminate | |
| Valve Type | Flat Plastic Valve (1 piece) | |
| Construction | 3D Cylindrical Air Chambers with Pillow Section | |
| Available Colors | Light Green, Gray | |
| Design | Anatomical with Integrated Pillow | |
| Includes | Sleeping Pad, Storage Sack | |
| Product Type | 3D Chamber Inflatable Sleeping Pad | |
Key features
- 3D internal air chambers cradle your body and cut side-to-side roll, so you stay centered instead of sliding off a flat tube pad
- Built-in head pillow means one less item to pack and inflate - the raised end supports your neck straight out of the stuff sack
- 3.5 inches (9 cm) of loft lifts hips and shoulders well clear of cold, uneven ground for genuine full-night comfort
- Ripstop 20D nylon with a TPU laminate on both faces resists punctures and abrasion while staying airtight over long trips
- Packs to just 4.3 x 11 inches (11 x 28 cm) and 23.3-24.0 oz, slipping easily into a pack side pocket
- Quick-inflate flat valve fills the pad in a handful of breaths and dumps the air fast when it is time to break camp
- Two length options let you match the mat to your height rather than settling for a one-size compromise
Who makes it
Terra Incognita has spent more than 18 years running trips and expeditions and manufacturing its own outdoor gear, so this model comes off the brand's own production line rather than a rebadged catalog. The design is tested in the field by the people who guide the trips.
The Terra Incognita Wave is an inflatable sleeping mat with a 3D air-chamber construction and an integrated pillow, built for campers who want a plush, insulated sleep surface that still packs down to the size of a water bottle. At 3.5 inches (9 cm) thick and 660-680 grams, it strikes the balance between backcountry portability and near-mattress comfort, and it comes in two size options so taller and shorter sleepers alike can find a proper fit.
Who is the Wave sleeping pad best suited for?
The Wave suits car campers, festival-goers, and backpackers who refuse to trade a good night of sleep for a lighter pack. Side sleepers benefit most from the 3.5-inch loft, which keeps hips and shoulders off the ground where a thinner foam pad would bottom out. The two size options make it a sensible pick for households sharing gear, since a taller and a shorter camper can each carry the length that fits them.
What materials make up the Wave pad?
Both the top and bottom faces use 20D nylon ripstop bonded with a TPU laminate. The ripstop weave stops small nicks from spreading into long tears, while the TPU layer holds air pressure and adds a measure of grip against a tent floor. The 3D chamber layout distributes your weight across independent baffles rather than one open bladder, which is what gives the pad its stable, supportive feel.
How do you set up and pack away the Wave?
Open the flat valve and inflate with a few steady breaths, topping off to your preferred firmness once you are lying on it. To pack down, open the valve fully, fold from the pillow end to push out the air, then roll tightly and store in the included sack. Keep the pad away from campfire sparks and sharp objects, wipe it clean with mild soap and water, and always store it loosely inflated at home to protect the laminate.
Specifications
| Characteristic | Size M | Size L |
|---|---|---|
| Dimensions (EU) | 176×54×9 cm | 188×67×9 cm |
| Dimensions (US) | 69×21×3.5 in | 74×26×3.5 in |
| Packed Size (EU) | ∅11×28 cm | ∅13×28 cm |
| Packed Size (US) | ∅4.3×11 in | ∅5.1×11 in |
| Weight Range (EU) | 660-680 g | 880-900 g |
| Weight Range (US) | 23.3-24.0 oz | 31.0-31.7 oz |
| Upper Material | 20D Nylon Ripstop with TPU laminate | |
| Bottom Material | 20D Nylon Ripstop with TPU laminate | |
| Valve Type | Flat Plastic Valve (1 piece) | |
| Construction | 3D Cylindrical Air Chambers with Pillow Section | |
| Available Colors | Light Green, Gray | |
| Design | Anatomical with Integrated Pillow | |
| Includes | Sleeping Pad, Storage Sack | |
| Product Type | 3D Chamber Inflatable Sleeping Pad | |
Key features
- 3D internal air chambers cradle your body and cut side-to-side roll, so you stay centered instead of sliding off a flat tube pad
- Built-in head pillow means one less item to pack and inflate - the raised end supports your neck straight out of the stuff sack
- 3.5 inches (9 cm) of loft lifts hips and shoulders well clear of cold, uneven ground for genuine full-night comfort
- Ripstop 20D nylon with a TPU laminate on both faces resists punctures and abrasion while staying airtight over long trips
- Packs to just 4.3 x 11 inches (11 x 28 cm) and 23.3-24.0 oz, slipping easily into a pack side pocket
- Quick-inflate flat valve fills the pad in a handful of breaths and dumps the air fast when it is time to break camp
- Two length options let you match the mat to your height rather than settling for a one-size compromise
Who makes it
Terra Incognita has spent more than 18 years running trips and expeditions and manufacturing its own outdoor gear, so this model comes off the brand's own production line rather than a rebadged catalog. The design is tested in the field by the people who guide the trips.
Questions & answers
Wave FAQ
How thick is the Wave sleeping pad?
The Wave is 3.5 inches (9 cm) thick when fully inflated. That loft is enough to keep hips and shoulders off the ground for side and back sleepers, delivering a level of cushioning closer to a mattress than to a thin closed-cell foam pad.
Does the Wave come with a pillow?
Yes, the Wave has an integrated pillow built into one end of the pad. The raised head section inflates along with the mat, supporting your neck without a separate accessory, which saves both pack space and setup time at camp.
How much does the Wave weigh and how small does it pack?
The Wave weighs 23.3-24.0 oz (660-680 g) and packs down to roughly 4.3 x 11 inches (11 x 28 cm). That is about the footprint of a large water bottle, so it stows easily in a pack side pocket or the top of a daypack.
Is the Wave durable enough for regular camping?
Yes, both surfaces use 20D nylon ripstop with a TPU laminate, a combination chosen to resist punctures and abrasion. The ripstop weave contains small nicks, while the TPU film keeps the pad airtight trip after trip. Keep it clear of sparks and sharp gear to extend its life.
You may also like
