The Air 2.7 is a self-inflating sleeping pad with a polyurethane foam core and a tough TPU coating, designed for alpine climbers and campers who want reliable insulation and support without fussing over a pump. Open the valve and the diamond-channel foam draws in air on its own, expanding to a full single-person sleeping surface that cushions you from cold, rocky ground. Weighing between 1.52 and 1.65 pounds and rolling down to a 6.3 by 10.6 inch cylinder, it strikes a practical balance between packability and the plush, stable feel that only foam-backed pads deliver.
Terra Incognita is a European outdoor brand with more than 18 years of expedition experience and its own gear manufacturing, and the Air 2.7 reflects that heritage in its layered build: a 75D Honey Rip-Stop top that resists abrasion and a 100D Oxford DITE bottom that grips your tent floor. For alpine climbing, mountaineering, and demanding base-camp nights, it offers set-and-forget comfort that holds up trip after trip.
Who is the Air 2.7 Lite pad built for?
The Air 2.7 is built for alpine climbers, mountaineers, and campers who value dependable comfort over the last few grams. Its foam core and grippy base make it well suited to sloped, rocky pitches where an air-only pad would slide or feel unstable. If you would rather open a valve and start setting up your tent than stand there inflating a pad in the cold, this self-inflating design is for you.
What is inside the Air 2.7 Lite pad?
The pad layers a 75D Honey Rip-Stop polyester top over a polyurethane foam core cut with diamond channels, then finishes with a 100D Oxford DITE bottom. The higher-denier base and its anti-slip surface handle contact with gritty, uneven ground, while the TPU coating adds a protective barrier against punctures and moisture. The diamond-channel foam is what makes the pad expand on its own and rebound to a consistent, supportive shape.
How does the Air 2.7 Lite perform on the mountain?
On the mountain, the foam core provides steadier, more even support than a pure air pad, which many climbers prefer on hard alpine surfaces. The Oxford DITE base keeps you from sliding off the pad on a tilted tent floor, and the self-inflating action means one less chore at the end of a long climbing day. Roll it up, close the valve, and it stows to a compact 6.3 by 10.6 inch cylinder for the descent.
Specifications
| Characteristic | Air 2.7 | Air 2.7 Lite |
|---|---|---|
| Length (EU) | 183 cm | 122 cm |
| Length (US) | 72 in | 48 in |
| Width (EU) | 51 cm | 51 cm |
| Width (US) | 20.1 in | 20.1 in |
| Thickness (EU) | 2.7 cm | 2.7 cm |
| Thickness (US) | 1.1 in | 1.1 in |
| Min Weight (EU) | 0.69 kg | 0.48 kg |
| Min Weight (US) | 1.52 lbs | 1.06 lbs |
| Max Weight (EU) | 0.75 kg | 0.54 kg |
| Max Weight (US) | 1.65 lbs | 1.19 lbs |
| Packed Size (EU) | ∅16 × 27 cm | ∅14 × 27 cm |
| Packed Size (US) | ∅6.3 × 10.6 in | ∅5.5 × 10.6 in |
| Foam Density (EU) | 18 kg/m³ | 18 kg/m³ |
| Foam Density (US) | 1.12 lbs/ft³ | 1.12 lbs/ft³ |
| Colors Available | Blue, Green | |
| Top Material | 75D Polyester Honey Rip Stop | |
| Bottom Material | 100D Oxford DITE | |
| Inner Coating | TPU | |
| Fill Material | Polyurethane foam with diamond channels | |
| Valve Type | Brass valve (1 pc) | |
| Shape | Anatomical | |
| Capacity | Single person | |
| Special Features | Self-inflating design, Anti-slip bottom surface | |
| Included Accessories | Carrying bag | |
| Gender | Unisex | |
| Recommended Use | Alpine Climbing, Mountain Trekking, Bike Touring | |
| Product Type | Self-Inflating Sleeping Pad | |
Key features
- Self-inflates through a polyurethane foam core, so you open the valve and let the pad do the work instead of blowing it up by lung or pump
- Weighs 1.52 to 1.65 pounds, a workable carry weight for a foam-backed pad that trades a few ounces for real durability and warmth
- Packs to a 6.3 by 10.6 inch roll that straps to a pack or drops inside a mountaineering haul bag
- Uses a 75D Honey Rip-Stop top surface that resists scuffs and abrasion from repeated setups on rough alpine terrain
- Features an anti-slip 100D Oxford DITE bottom that keeps the pad from sliding across slick tent floors and sloped ground
- Adds a TPU coating for extra puncture and moisture resistance, protecting the air seal on sharp, gritty surfaces
- Built with diamond-channel foam that distributes support evenly and speeds the self-inflation process
- Single-person sizing concentrates cushioning and insulation where one climber actually sleeps
Who makes it
Terra Incognita has spent more than 18 years running trips and expeditions and manufacturing its own outdoor gear, so this model comes off the brand's own production line rather than a rebadged catalog. The design is tested in the field by the people who guide the trips.
The Air 2.7 is a self-inflating sleeping pad with a polyurethane foam core and a tough TPU coating, designed for alpine climbers and campers who want reliable insulation and support without fussing over a pump. Open the valve and the diamond-channel foam draws in air on its own, expanding to a full single-person sleeping surface that cushions you from cold, rocky ground. Weighing between 1.52 and 1.65 pounds and rolling down to a 6.3 by 10.6 inch cylinder, it strikes a practical balance between packability and the plush, stable feel that only foam-backed pads deliver.
Terra Incognita is a European outdoor brand with more than 18 years of expedition experience and its own gear manufacturing, and the Air 2.7 reflects that heritage in its layered build: a 75D Honey Rip-Stop top that resists abrasion and a 100D Oxford DITE bottom that grips your tent floor. For alpine climbing, mountaineering, and demanding base-camp nights, it offers set-and-forget comfort that holds up trip after trip.
Who is the Air 2.7 Lite pad built for?
The Air 2.7 is built for alpine climbers, mountaineers, and campers who value dependable comfort over the last few grams. Its foam core and grippy base make it well suited to sloped, rocky pitches where an air-only pad would slide or feel unstable. If you would rather open a valve and start setting up your tent than stand there inflating a pad in the cold, this self-inflating design is for you.
What is inside the Air 2.7 Lite pad?
The pad layers a 75D Honey Rip-Stop polyester top over a polyurethane foam core cut with diamond channels, then finishes with a 100D Oxford DITE bottom. The higher-denier base and its anti-slip surface handle contact with gritty, uneven ground, while the TPU coating adds a protective barrier against punctures and moisture. The diamond-channel foam is what makes the pad expand on its own and rebound to a consistent, supportive shape.
How does the Air 2.7 Lite perform on the mountain?
On the mountain, the foam core provides steadier, more even support than a pure air pad, which many climbers prefer on hard alpine surfaces. The Oxford DITE base keeps you from sliding off the pad on a tilted tent floor, and the self-inflating action means one less chore at the end of a long climbing day. Roll it up, close the valve, and it stows to a compact 6.3 by 10.6 inch cylinder for the descent.
Specifications
| Characteristic | Air 2.7 | Air 2.7 Lite |
|---|---|---|
| Length (EU) | 183 cm | 122 cm |
| Length (US) | 72 in | 48 in |
| Width (EU) | 51 cm | 51 cm |
| Width (US) | 20.1 in | 20.1 in |
| Thickness (EU) | 2.7 cm | 2.7 cm |
| Thickness (US) | 1.1 in | 1.1 in |
| Min Weight (EU) | 0.69 kg | 0.48 kg |
| Min Weight (US) | 1.52 lbs | 1.06 lbs |
| Max Weight (EU) | 0.75 kg | 0.54 kg |
| Max Weight (US) | 1.65 lbs | 1.19 lbs |
| Packed Size (EU) | ∅16 × 27 cm | ∅14 × 27 cm |
| Packed Size (US) | ∅6.3 × 10.6 in | ∅5.5 × 10.6 in |
| Foam Density (EU) | 18 kg/m³ | 18 kg/m³ |
| Foam Density (US) | 1.12 lbs/ft³ | 1.12 lbs/ft³ |
| Colors Available | Blue, Green | |
| Top Material | 75D Polyester Honey Rip Stop | |
| Bottom Material | 100D Oxford DITE | |
| Inner Coating | TPU | |
| Fill Material | Polyurethane foam with diamond channels | |
| Valve Type | Brass valve (1 pc) | |
| Shape | Anatomical | |
| Capacity | Single person | |
| Special Features | Self-inflating design, Anti-slip bottom surface | |
| Included Accessories | Carrying bag | |
| Gender | Unisex | |
| Recommended Use | Alpine Climbing, Mountain Trekking, Bike Touring | |
| Product Type | Self-Inflating Sleeping Pad | |
Key features
- Self-inflates through a polyurethane foam core, so you open the valve and let the pad do the work instead of blowing it up by lung or pump
- Weighs 1.52 to 1.65 pounds, a workable carry weight for a foam-backed pad that trades a few ounces for real durability and warmth
- Packs to a 6.3 by 10.6 inch roll that straps to a pack or drops inside a mountaineering haul bag
- Uses a 75D Honey Rip-Stop top surface that resists scuffs and abrasion from repeated setups on rough alpine terrain
- Features an anti-slip 100D Oxford DITE bottom that keeps the pad from sliding across slick tent floors and sloped ground
- Adds a TPU coating for extra puncture and moisture resistance, protecting the air seal on sharp, gritty surfaces
- Built with diamond-channel foam that distributes support evenly and speeds the self-inflation process
- Single-person sizing concentrates cushioning and insulation where one climber actually sleeps
Who makes it
Terra Incognita has spent more than 18 years running trips and expeditions and manufacturing its own outdoor gear, so this model comes off the brand's own production line rather than a rebadged catalog. The design is tested in the field by the people who guide the trips.
Questions & answers
Air 2.7 Lite FAQ
How does a self-inflating sleeping pad work?
A self-inflating pad works by opening the valve and letting an open-cell foam core draw in air as it expands. On the Air 2.7, a diamond-channel polyurethane foam does this automatically, so the pad fills most of the way on its own; you only add a breath or two at the end to set your preferred firmness.
How much does the Air 2.7 weigh?
The Air 2.7 weighs between 1.52 and 1.65 pounds depending on the unit. That is heavier than a bare air pad, which is the trade-off for the added durability, self-inflation, and steady foam-backed support that make it well suited to alpine climbing and rugged base-camp use.
Will this pad slide around inside my tent?
No, the pad resists sliding thanks to its anti-slip 100D Oxford DITE bottom fabric. That grippy, higher-denier base holds the pad in place on slick tent floors and sloped alpine terrain, so you stay centered on the surface through the night instead of drifting off the edge.
How small does the Air 2.7 pack down?
The Air 2.7 rolls down to a cylinder of about 6.3 by 10.6 inches. That packed size is larger than an ultralight air pad because of the foam core, but it still straps neatly to a pack or fits inside a mountaineering haul bag for the approach and descent.
You may also like
